Mastering Tutorial- Izotope Ozone?
-
- Posts: 16
- Joined: Tue Dec 21, 2004 11:30 am
Mastering Tutorial- Izotope Ozone?
Hello Earle & Co.
You've got a great product and site. I looked thru the Mastering Tutorial and noticed it was geared towards Waves or Sound Forge. I was wondering if you or any other users have any input on how to deal with Multi-Comp/Mastering use via RMS Peaks, etc. by utilizing Izotope Ozone? I can't seem to apply your tutorial effectively (Max RMS Peaks & Band Compression) using this application.
Thanks, B.
You've got a great product and site. I looked thru the Mastering Tutorial and noticed it was geared towards Waves or Sound Forge. I was wondering if you or any other users have any input on how to deal with Multi-Comp/Mastering use via RMS Peaks, etc. by utilizing Izotope Ozone? I can't seem to apply your tutorial effectively (Max RMS Peaks & Band Compression) using this application.
Thanks, B.
Re: Mastering Tutorial- Izotope Ozone?
Brianbrian770295 wrote:Hello Earle & Co.
You've got a great product and site. I looked thru the Mastering Tutorial and noticed it was geared towards Waves or Sound Forge. I was wondering if you or any other users have any input on how to deal with Multi-Comp/Mastering use via RMS Peaks, etc. by utilizing Izotope Ozone? I can't seem to apply your tutorial effectively (Max RMS Peaks & Band Compression) using this application.
Thanks, B.
How the heck are you
![Smile :)](./images/smilies/icon_smile.gif)
You can use Ozone 3 this way.
1. Load track into Har-Bal and balance with intiutQ
2. Go to our other web site and download the preset www.hdqtrz.com/Ozone (This will be your starting point)
3. Place it in your Ozone presets folder
4. Check the RMS level of your track first before opening Ozone
5. Load yOur track in your sound editor and open Ozone and choose the preset.
6. Click on the Loudness Maximizer in Ozone and increase or decrease your track based on the RMS level. Shoot for 13dbs. In other words if the RMS value of your track was 17dbs then the maximizer needs to be moved to -4
7. Make any adjustments in your multiband dynamics module (Usually not necessary after Har-Bal has balanced your track)
8. How does it sound.......................Good
There are some other things we can do, but first tell me how it sounds.
Earle
-
- Posts: 16
- Joined: Tue Dec 21, 2004 11:30 am
You guys are awesome !
No one touches you support wise...
I tried your approach and it definitely sounds better.
The Ozone preset (GM Complete CD)really jacks the High Dynamic Band up. (+11db)
Seems to be alot and really creates a hump on the final HB graph.
Plus Auto-smoothing & RMS detection aren't ON in Dynamics section.
Is this right....
Or should I just bypass Dynamics section.
Because you mentioned that dynamics really aren't needed after IQ does it's job.
Definitely in the right direction though.
Thanks B.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
No one touches you support wise...
I tried your approach and it definitely sounds better.
The Ozone preset (GM Complete CD)really jacks the High Dynamic Band up. (+11db)
Seems to be alot and really creates a hump on the final HB graph.
Plus Auto-smoothing & RMS detection aren't ON in Dynamics section.
Is this right....
Or should I just bypass Dynamics section.
Because you mentioned that dynamics really aren't needed after IQ does it's job.
Definitely in the right direction though.
Thanks B.
Brianbrian770295 wrote:You guys are awesome !![]()
No one touches you support wise...
I tried your approach and it definitely sounds better.
The Ozone preset (GM Complete CD)really jacks the High Dynamic Band up. (+11db)
Seems to be alot and really creates a hump on the final HB graph.
Plus Auto-smoothing & RMS detection aren't ON in Dynamics section.
Is this right....
Or should I just bypass Dynamics section.
Because you mentioned that dynamics really aren't needed after IQ does it's job.
Definitely in the right direction though.
Thanks B.
Some songs sound better with auto smoothing "on". You will have to determine that one by listening to it. This preset actually opens the song and creates a wall of sound. The biggest problem most folks have is the configuration of the attack and release settings. This is why there is an auto-smoothing option.
Don't worry about the RMS detection.
If you use the dynamics section the only thing you will need to adjust is the "Threshold limiter" for each section. The easiest way to do this is to actually pull the lever down in the area where you have the numbers 0,16,32,48,64.
Pull the lever down until you reach the actual movement. If your track is a little to bright highlight the third window from the left under the "dynamics" tab and pull it all the way down and slowly bring it up untill it is sitting (sounding) nice in the track (not muffled)
You shouldn't need to low shelf using the parametric equalizer because you should of done this in Har-Bal before bringing it over to Ozone. Best to low shelf at 45hz.
Of course I like to break the rules and import the track back over to Har-Bal if I am doing an album so I can use the "Match Loudness" function.
If you are set up to be able to monitor sound from your system both internally and externally you can download the following tool and go to screen four (frequency analysis, slow).Use your right arrow key to toggle between the screens
When it is horizontal your track is fine. (Its logarithmic)
You can download it from the link below. It is a metering tool and it is free.
http://voyager.adsl.dk/knef/vumeter/
Cheers
Earle
-
- Posts: 16
- Joined: Tue Dec 21, 2004 11:30 am
You Guys Rock!...Information I can Use & Apply NOW.
Super....Thanks a million.
I did try the UVmeter you mentioned in another post and was having a hard time figuring which parameters to adjust in the dynamics. So, from what you're saying is- I adjust the T Limiter lever for each band
and try to get the most horizontal constant. (I noticed bands will still jump vertical depending on the song section or dynamic shift.) So find your busiest or most consistent song section and horizontal that?
And lastly...(I promise)
Is going back to HB to use the Air feature beneficial. (It did sound nicer).
The preset seems to have a bit of enhancements already.
Don't want to overkill...
Thanks again...B.
I did try the UVmeter you mentioned in another post and was having a hard time figuring which parameters to adjust in the dynamics. So, from what you're saying is- I adjust the T Limiter lever for each band
and try to get the most horizontal constant. (I noticed bands will still jump vertical depending on the song section or dynamic shift.) So find your busiest or most consistent song section and horizontal that?
And lastly...(I promise)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Is going back to HB to use the Air feature beneficial. (It did sound nicer).
The preset seems to have a bit of enhancements already.
Don't want to overkill...
Thanks again...B.
Re: You Guys Rock!...Information I can Use & Apply NOW.
And lastly...(I promise)
Is going back to HB to use the Air feature beneficial. (It did sound nicer).
The preset seems to have a bit of enhancements already.
Don't want to overkill...
Thanks again...B.
Brian
If it sounds nicer, by all means use it![Smile :)](./images/smilies/icon_smile.gif)
There are no rules. As long as you have balanced your track the sky is the limit.
Cheers
Earle
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Is going back to HB to use the Air feature beneficial. (It did sound nicer).
The preset seems to have a bit of enhancements already.
Don't want to overkill...
Thanks again...B.
Brian
If it sounds nicer, by all means use it
![Smile :)](./images/smilies/icon_smile.gif)
There are no rules. As long as you have balanced your track the sky is the limit.
Cheers
Earle
PhiPhi Lion wrote:HI guys.
I cant seeem to download the preset.
cheers
If you are using Internet Explorer, right click on the file and choose "save target as" and choose a folder to download it to.
If you are using Mozilla Firefox, right click on it and choose "Save link as", and pick a folder to save it to.
Cheers
Earle
hi and a happy new year to all of you!
when i try to import the preset it gives me "invalid preset"??
any suggestions?
cheers
robert
any suggestions?
cheers
robert
Re: hi and a happy new year to all of you!
Robertropro wrote:when i try to import the preset it gives me "invalid preset"??
any suggestions?
cheers
robert
You don't import it. You need to place it in the folder with the rest of your Ozone presets.
As a matter of fact when you download it, save it to the path below. Make sure Ozone is closed when you do this.
The path is as follows
C:\Documents and Settings\<your username>\My Documents\iZotope Ozone Presets
Cheers
Earle
You may need to go to the ozone support web site. They have alternate directory paths which may work for you.Mark wrote:I'm getting an error message for this as well, and I've followed the instructions correctly as far as saving it to the correct directory is concerned etc etc.
Below is the link
http://www.izotope.com/products/audio/o ... esets.html
Earle