Har-Bal Song Snap Shot
Posted: Wed Jul 16, 2008 1:29 pm
Hi I have took a snap shot with a problem track any tips file added here
The Official Har-Bal Forum
https://www.har-bal.com/ipw-web/bulletin/bb/
https://www.har-bal.com/ipw-web/bulletin/bb/viewtopic.php?t=1012
Any chance of you having a listen the mix seems lacking in bass also I have about 5 tracks I recorded in a studio that I want to use as a demoMister wrote:Without actually hearing the track, (and assuming that it is a full mix), visually there is a boost at what looks like 280Hz which can cause problems with clarity (ie: muddiness) and playback on boomboxes. I hear (and see this in HarBal) a lot with client mixes in this region (200Hz - 500+ Hz). Try making a cut where you see that peak, and then go over with IntuitQ and listen to the result. 8 times out of 10, the problem vanishes - it's almost like magic and with HarBal very quick! One other approach is one Earle frequently mentions: select the Hi-shelving filter and starting at 1kHz, gently raise the high end and listen for increased clarity. You might have to go above or below 1kHz, but that is just a starting point. Hope this helps.
Karl