INTERESTING WAY TO USE HAR BAL
Posted: Thu Jun 15, 2006 10:50 am
This product is amazing and it`s really helpful. I`m looking forward to plug in version of HAR-BAL.Before it comes, wont tell you what I find.I think that there is a problem because audio have to be record for 3 times.
1.audio export mixdown in Nuendo for example,32bit,192 or 96 khz file,
2.import and process in HAR BAL probably at same resolution,
3.and finaly import and process in Wavelab for example, to 16bit,44,1khz file
Please tell me am I wrong,but think that is not so good for audio quality?
After some experimentation I find this way>route signal from HAR BAL to Nuendo ( or whatever seq. you prefer ) wia sound card. In the sound card must mute channel on which signal from HAR BAL is coming,but send it wia asio channel to Nuendo.Now switch on monitor, on one audio channel(stereo of course)in Nuendo,monitoring wia Nuendo. If you hear the sound when start play in HAR BAL then you can take next step.Insert some effects to INPUT channel .In the first patch it will be EQ to bring low cut.Then multiband compressor to take care of bands dynamics,specialy of bass,max bass,some of your choice, AND FINALLY LIMITER/ MAXIMIZER in THE 7 OR 8 PATCH BECAUSE IT IS POST FADE.In the real time you can tweak harmonic balance in HAR BAL and dynamic balance and maximalization+dither in NUENDO.Nuendo project must be set to 16 bit,44,1khz because you gona record it in a real time.ALL effects must be insert in INPUT channel only.When you are ready, start record in Nuendo and start play in HAR BAL.Only problem is the moment of record start.If it is early you have pause before the song and thats not good because when you later cut it you must render it again,and we dont want another rerererecord.Solution is> when export your mixdown, export it with one bar of clic which will tell you when to start recording.LIsten it to be able to stop recording.Prerecord time in preference must be set to 0 sec.After finish recording take your new file from audio folder and rename it,than open the bear.Thats it.PLease tell me is this a stupid way or not.Possible because I am new in this.
,sorry I have little problem with English.
Best Regards
1.audio export mixdown in Nuendo for example,32bit,192 or 96 khz file,
2.import and process in HAR BAL probably at same resolution,
3.and finaly import and process in Wavelab for example, to 16bit,44,1khz file
Please tell me am I wrong,but think that is not so good for audio quality?
After some experimentation I find this way>route signal from HAR BAL to Nuendo ( or whatever seq. you prefer ) wia sound card. In the sound card must mute channel on which signal from HAR BAL is coming,but send it wia asio channel to Nuendo.Now switch on monitor, on one audio channel(stereo of course)in Nuendo,monitoring wia Nuendo. If you hear the sound when start play in HAR BAL then you can take next step.Insert some effects to INPUT channel .In the first patch it will be EQ to bring low cut.Then multiband compressor to take care of bands dynamics,specialy of bass,max bass,some of your choice, AND FINALLY LIMITER/ MAXIMIZER in THE 7 OR 8 PATCH BECAUSE IT IS POST FADE.In the real time you can tweak harmonic balance in HAR BAL and dynamic balance and maximalization+dither in NUENDO.Nuendo project must be set to 16 bit,44,1khz because you gona record it in a real time.ALL effects must be insert in INPUT channel only.When you are ready, start record in Nuendo and start play in HAR BAL.Only problem is the moment of record start.If it is early you have pause before the song and thats not good because when you later cut it you must render it again,and we dont want another rerererecord.Solution is> when export your mixdown, export it with one bar of clic which will tell you when to start recording.LIsten it to be able to stop recording.Prerecord time in preference must be set to 0 sec.After finish recording take your new file from audio folder and rename it,than open the bear.Thats it.PLease tell me is this a stupid way or not.Possible because I am new in this.
,sorry I have little problem with English.
Best Regards